Water Heater Thermocouple Replacement

Recently, you might have seen the jokes circulating online about "first world problems." When it comes to today's luxuries, we tend to take hot showers for granted. Thefirst world problemhere is that we act like cold showers are the worst thing that can happen. Though that may be a little extreme, when you've become accustomed to modern conveniences, nobody wants to deal with a brokenwater heater. Here we will cover how to replace athermocoupleon a water heater.

What Do I Do If the Pilot Light Is Out?

Your gas water heater will stop operating if the pilot light goes out. The fix is easy if you knowhow to light a water heater. If your pilot light keeps going out, you may have a faulty thermocouple. A thermocouple senses the heat of a pilot light and then lets gas flow to the burner. When the thermocouple has gone bad, it will shut off the gas supply to both the pilot and the burner. If this is why your pilot light has gone out, you will need to replace your thermocouple with a new one.

Water Heater Thermocouple Replacement in 5 Steps

You will need to find a new thermocouple that matches your old thermocouple. One that is the same size and length. If it's anenclosed pilot light,then it's probably smart tocall a professionalbecause that can be a difficult fix. Once you have purchased your new thermocouple, you can then pull out the old one and replace it with your new one, using the following steps:

To Begin,TURN OFF THE GAS CONTROL VALVE!
Once you have the valve turned off, you canremove the burner access covers. Remove the nuts which may be found on the gas, pilot, and thermocouple lines.
Detach the thermocoupleand remove it. It's usually snapped into place with a couple of clips and with the end inserted within the pilot assembly.
Install your new thermocoupleexactly the same way your old one was installed. Turn the control valve back on. Put it to the test. Your water heater should be up and running again as good as new!
Turn the gas back on, and you're in business.

After installing a new thermocouple, if you are still having problems getting your pilot light to work, you may need to ask for advice from a professional. If you prefer a video tutorial, try thisDANDLINC walkthrough.

Enjoy Your Repaired Water Hater

修复一个坏了通常的热电偶an easy task, and in many cases, it will get your system up and running again in no time at all. If, for some reason, you are having problems with the installation or smell gas, stop your install immediately. You should never smell gas while fixing a water heater pilot light if you are doing everything correctly. Remember that if you feel nervous or have a question about your installation process, it's always a good idea to ask for help on fixing a water heater pilot. Save on water heaters and accessories, like thisHoneywell 3/4" mixing valve, when you shop with PlumbersStock. Remember that we have all thewater heater parts及配件你需要!

Try atankless water heater! It's a great way to supplement your existing tank system, or it's even possible your entire home can operate with just one tankless unit for all your hot water needs.